Home > Snowmobile > Electrical & Ignition > Fuel & Timing Systems > Dynojet products > Arctic Cat
Dynojet controllers for Arctic Cat Snowmobiles
Sort By:
Page of 1
Dynojet Wideband 2 with POD-300 Display
Dynojet Wideband 2 with POD-300 Display
List Price: $479.95
Our Price: $479.95
Sale Price: $455.95
Savings: $24.00

This wideband O2 gauge is an extremely accurate and capable unit. Complete with it's own POD-300 Digital display, it makes precision fuel injection tuning easy. It allows the user to monitor and record O2, throttle position, RPM, and one other 0 to 5 volt analog input such as manifold air pressure, boost pressure, etc.  It can be used as a stand alone unit or connected to a Power Commander V (PCV). When connected to a PCV, the injector duty cycle and percent of change can also be monitored and recorded.  If desired, with the use of a CAN to CAN cable (PN 70-134) this Wideband 2 can be used as an Autotune unit.  It has the ability to test the sensor condition at any elevation to ensure the data you are receiving is accurate. This unit is extremely beneficial for precision fuel injection tuning. more info
Dynojet Power Commander V (Arctic Cat)
Dynojet Power Commander V (Arctic Cat)
List Price: $379.95
Our Price: $379.95
Sale Price: $360.95
Savings: $19.00

The Power Commander V fuel controller gives you the ability to use a pre-programmed SLP map or create a custom map of your own.
Some PCV models also allow ignition timing control capabilities that provide a good horsepower improvement over just controlling fuel alone.
SLP has maps for most popular SLP engine configurations. However, if you choose to make a custom map for an engine configuration not supported by SLP, the PCV has the ability to be outfitted with optional tuning/monitoring accessories such as Autotune, Wideband 2 and the POD-300 display.
Selections:
  • 70-128
    • 2007-16 Arctic Cat 800/1000 PCV (fuel only) | See 70-152 for Timing & Fuel controller.
  • 70-129
    • 2003-11 Arctic Cat 5/6/700 PCV
  • 70-156
    • 2014-16 Arctic Cat 7000 PCV
 more info
Dynojet POD-300 Display
Dynojet POD-300 Display
List Price: $325.54
Our Price: $325.54
Sale Price: $274.99
Savings: $50.55

The POD-300 is an accessory display for Dynojet devices that support DJ-CAN, including the popular Power Commander V, Autotune, WideBand 2, and CMD. Simply connect the included CAN cable and you’re ready to go; there’s no need to tap power or deal with other messy connections. Need to adjust your tune in the field, or datalog the supported channels to further refine your tune? No problem, with the POD-300 you’re just a few clicks away from taking advantage of the many features with it’s easy to use menu system.

FEATURES:
  • Real time fuel adjustments
  • Display channels real time: RPM, TP, Map Position (When using map switch),
  • Duty cycle, fuel changes, ignition changes and wideband air/fuel ratio - (W/WB2 or AutoTune connected)
  • Weather resistant for use in all conditions.
  • Log channels saved to internal memory and can be viewed / analyzed with DynoJet’s Powercore Software
  • High contrast display, viewable in direct sunlight.
 more info
Dynojet Autotune
Dynojet Autotune
List Price: $279.99
Our Price: $279.99
Sale Price: $263.15
Savings: $16.84

The POD-300 is an accessory display for Dynojet devices that support DJ-CAN, including the popular Power Commander V, Autotune, WideBand 2, and CMD. Simply connect the included CAN cable and you’re ready to go; there’s no need to tap power or deal with other messy connections. Need to adjust your tune in the field, or datalog the supported channels to further refine your tune? No problem, with the POD-300 you’re just a few clicks away from taking advantage of the many features with it’s easy to use menu system.

FEATURES:
  • Real time fuel adjustments
  • Display channels real time: RPM, TP, Map Position (When using map switch),
  • Duty cycle, fuel changes, ignition changes and wideband air/fuel ratio - (W/WB2 or AutoTune connected)
  • Weather resistant for use in all conditions.
  • Log channels saved to internal memory and can be viewed / analyzed with DynoJet’s Powercore Software
  • High contrast display, viewable in direct sunlight.
 more info
Map switch and harness for PCV
Map switch and harness for PCV
List Price: $49.95
Our Price: $49.95
Sale Price: $47.50
Savings: $2.45

The Power Commander 5 has the ability to store two maps and can be toggled between the two maps with the use of a switch or jumper.
This feature gives you the ability to switch between a non-ethanol map and an ethanol map or a low altitude map and a high altitude map.
Unlike using a single map install this feature allows you to change maps without connecting to a computer to load a different map.
Harness is 5 feet long.
 more info
Weld On bung & plug
Weld On bung & plug
List Price: $19.95
Our Price: $19.95
Sale Price: $18.95
Savings: $1.00

Extra bung and plug for connecting Autotune, Wideband 2 & X-2 Gauge to the exhaust pipe.
 more info
CAN to CAN Cable
CAN to CAN Cable
List Price: $17.00
Our Price: $17.00
Sale Price: $16.25
Savings: $0.75

With this cable the Wideband 2 can be used as an Autotune unit. more info